U501 Strut Beam Clamp

$9.00 each
SKU
46-4211
- +

This beam clamp is designed to be mounted in pairs on steel I-Beams (one on each side of the I-Beam).  For use with A1200, A1400, B1200, B1400, B1402, or C1200 series Strut channel.

  • Holds Strut channel in place with U-Bracket
  • Design Load:  2150 lbs.
  • Plate Thickness:  3/16"
  • Plate Measures:  2" x 3" x 1/2"
  • While we refer to this hardware using the generic term "Strut", it is also known as Unistrut or SuperStrut.  We use A1200 Series Half Slot Channel for the majority of our installations, but most of the hardware we carry should work with any strut channel with a width of 1-5/8" and an opening of 7/8".
  • WARNINGRigging requires a thorough knowledge of loading dynamics & design factors.  Improper installation or misapplication of a single product can lead to structural failure, bodily injury, or even death.
    When planning a rigging project, we strongly recommend that purchasers use an experienced ETCP rigging technician, and/or personnel meeting the OSHA "competent person" standard.
Basics
Our SKU46-4211
Dimensions
Box L x W x H1.75" x 3" x 3.75"
Weight1
Write Your Own Review
You're reviewing:U501 Strut Beam Clamp
Your Rating
We found other products you might like!
Copyright © 1971-2024 Musson Theatrical, Inc.