542 Side Beam Hanger Clip
$9.00
each
In Stock
We should have 52 in stock. Need more? It usually takes us 2 - 4 weeks to bring more in.
SKU
46-406
Part
542
This is a 90° angle fitting for most Strut channels, connects hanging rod to a piece of strut in the same orientation (horizontal/vertical). Has different sized holes (7/16" and 9/16") on each size which allows for versatility in using 3/8" or 1/2" threaded rod.
- Hole Diameter: 1/4" (2 per side), 7/16"(one side), 9/16"(one side)
- Thickness: 3/16"
- Measures: 2" x 2-1/16" x 2-1/16"
- While we refer to this hardware using the generic term "Strut", it is also known as Unistrut or SuperStrut. We use A1200 Series Half Slot Channel for the majority of our installations, but most of the hardware we carry should work with any strut channel with a width of 1-5/8" and an opening of 7/8".
| Basics | |
|---|---|
| Part # | 542 |
| Our SKU | 46-406 |
| Dimensions | |
|---|---|
| Box L x W x H | 2.01" x 2.01" x 2.01" |
Write Your Own Review
We found other products you might like!
