Apollo ME-1066 - Ship Anchor

Apollo patterns are available in several formats to meet a range of uses:

• Metal 100+ hours¹ — Most common option, laser cut from 8 mil stainless steel.
• Aluminum (varies) — Better heat dissipation than metal, laser cut from 16 mil aluminum.
• PrintScenic Plastic 70-80 hours¹ — LED-only, printed on plastic.
• PrintScenic Glass 300-400 hours¹ — LED-only, printed on glass.
• B&W Glass 400+ hours¹ — Laser-etched on glass.
• ¹ Longevity is affected by many factors. Hours are not guaranteed.

Gobos are like stencils for profile (ERS-style) lighting fixtures, allowing light to shine through certain areas and project a pattern.  The color of the projected image can be changed by adding a sheet of lighting gel, or by changing colors on most LED fixtures.  By adding a donut (color frame with smaller hole) you can increase the contrast and clarity of the projected image.  Full-size Source Four fixtures also offer EDLT and XDLT lens tube options designed for the highest quality gobo projection.

The size of a projected gobo image depends on the beam angle of your fixture, a larger beam angle will increase the gobo size diameter, however the resulting image will appear dimmer (with same fixture, since the light is spread over a larger area).  Gobos come in many different sizes for a range of fixtures, the table below gives a summary of the most common sizes that we list online.  Not sure what size to order?  Just make a note of your fixture make/model and we'll make sure the gobo gets sized correctly².

• ² Not all patterns can be made in steel sizes under 86mm (B size).  This is usually due to intricate/detailed artwork, but certain fixtures also require the use of glass gobos.

• * E/Custom Sizes – Please make a note of your fixture make and model to ensure correct sizing for your application.