Please note we will be closed from Thursday, November 22nd through Sunday, November 25th to celebrate Thanksgiving.  We'll re-open at 8:30 am on Monday.

Net3 Four-Port DMX/RDM Gateway

From $1,200.00 What's this?
SKU
N34G
- +

ETC's Four-Port Gateway is a DMX and RDM distribution device built on the quality and reliability of ETC's network development.  Built for networking systems using industry standard streaming ACN (sACN) protocol, the Four-Port Gateway is compatible with ETC network system products.  It uses bidirectional Ethernet communication with other network devices to send or receive DMX512 data and RDM messages.  The Four-Port Gateway supports up to four DMX inputs and outputs, Terminal Strip and RJ45 connections in any combination to transport up to 2048 channels of DMX over Ethernet.  Each Gateway may be configured with as few as one port or up to four ports, with each port independently defined as an output or an input.

  • Up to 4 ports, configurable for Input or Output¹
  • Multiple connector options
  • Distributes up to 4 universes (2,048 Channels) of DMX/RDM data over Ethernet
  • Supports sACN and Net3 protocols
  • LCD screen for labeling, status and configuration information
  • Configurable using Net3 Concert Software
  • ¹ Must be configured using external PC running Net3 Concert.  5-pin XLR turnarounds may be used as needed.
Suggested ItemsPoE Switch or PS-406F Power Supply
Lighting
ApplicationStage or Architectural
Basics
Suggested ItemsPoE Switch or PS-406F Power Supply
ManufacturerETC
Our SKUN34G
Dimensions
Box L x W x H14.3" x 12" x 3"
Weight4
  • 887.79
  • I, 09-2016
  • Mar. 30th, 2018
  • 1.73
  • B, 08-2016
  • Mar. 30th, 2018
  • 55.86
  • 06-2014
  • Mar. 30th, 2018
Front view of product, for use in your drawings.
19" rack mount view of product, for use in your drawings.
19" rack mount view of dual gateways, for use in your drawings.
19" rack mount view of product with front connector option, for use in your drawings.
Standard drawing of product, for use with project submittals.
Standard drawing of product when used in a 19" equipment rack, for use with project submittals.
Standard drawing of dual gateways when used in a 19" equipment rack, for use with project submittals.
Write Your Own Review
You're reviewing:Net3 Four-Port DMX/RDM Gateway
Your Rating
Copyright © 1971-2018 Musson Theatrical, Inc.