PF-1000 Pencil Fogger

The PF-1000 Remote Head Fogger is essentially a fog machine taken out of its box and reassembled to meet special design needs.  It is designed for remote, precise applications where the use of a standard fog machine is not practical.

The system consists of a Heat Exchanger Module that is separate from the Control Module and attached with tubing and a special cable.  The Heat Exchanger Module is approximately 9" long and 3" in diameter.  This small size allows it to be affixed in many places a standard fog machine could not be used, such as in props and animated mannequins.  The Control Module can be mounted on a wall or placed anywhere remote to the Heat Exchanger Module and fluid reservoir.

• Water based Fog Machine
• No reservoir, pulls fluid directly from bottle
• Uses 0.48 liters of fluid an hour at maximum output
• Heater Wattage:  ~300w
• Volume Control:  Yes
• Continuous Output:  Yes (for 8 hours, not for 24/7 use)
• Control Module with volume and air solenoid controls
• Optional DMX Interface
• 1/4" Air input connection for cleaning and maintenance
• Heat Exchanger must not be enclosed, continuous air flow required around it.