QolorPIX Pixel Controlled LED Tape

QolorPIX Pixel Controlled LED Tape is designed for the most demanding professional applications, with 48 individually controlled LED lights per meter.  Each reel of tape includes a soldered-on four-pin XLR connector on one end, creating a plug and play connection to the QolorPIX Tape Controller to create thousands of effects, including chases, fades, scrolls, bursts, and more, with the option of using onboard Multiverse wireless DMX/RDM technology.  QolorPIX Pixel Controlled LED Tape runs on low voltage (5VDC) and is sold in five-metre reels, with a maximum cable connection length (between controller and tape) of 32.8' (10 meters).  Available in both water resistant (IP67 rated, jacketed in clear rectangular silicone) or indoor use only (IP20 rated, not jacketed) versions.

• LED Tape with pixel control accuracy for professional entertainment and architecture
• Pixel Control* - Pair with QolorPIX Tape Controller for DMX Control
• Effects engine - Control with as few as 16 or 32 channels
• Can be cut to length
• Average lifetime of 50,000 hours
• LED Beam Angle: 120°
• LED Density: 14.6/ft (48/m)
• Need help putting a QolorFlex system together?  Send us an email!
• Requires QolorPIX Tape Controller for power/data.
• * Complete RGB pixel control only possible up to 170 LEDs (510 DMX channels) per output.  This leaves 30% of a standard 16.4' (5 meter) roll unusable (unless you connect it to a different port).