Rosco TV Paints provide maximum and minimum reflectance values to meet the sensitive contrast requirements for standard television and video systems.
TV White is a light Neutral grey that meets specifications for 60% reflectance, the maximum brightness for use in video white balancing. TV Black is a rich matte black which meets specifications for 3% reflectance, the minimum brightness intended for transmission.
CoverageApproximately 300 feet² per gallon, depending on substrate, application tool and film thickness
Binder TypeVinyl Acrylic
DilutionUse straight out of the can. If necessary, dilute up to 10% with water.
Surface PreparationSurfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
ApplicationStir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
Film Thickness2 mil. Dry Film
VOC ContentMax 50g/L
Average Dry TimeAt 75°F, dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
Clean-upSoap and water
Shelf LifeMinimum 24 months
CAUTIONSDo not apply when surface or air temperatures are below 50°F (10°C). Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco/Musson assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.