UA844+SWB/LC Antenna Distribution System w/o Antenna Cables

The UA844+SWB/LC option comes with the four push on DC cables and no antenna cables.  It is recommended for use with the BLX4R and QLX-D wireless systems.  To connect the receiver antenna ports to the UA844+SWB/LC, use the BNC-BNC antenna cables supplied with each BLX4R or QLX-D wireless systems.

The Shure UA844+SWB/LC is an antenna distribution system that allows for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers.  It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs.  A single UA844+SWB/LC system can support up to five wireless receivers.  A maximum of five UA844+SWB/LC systems may be used in a two-tiered configuration.

• Five-way RF signal output
• Front-mounting antenna hardware
• Rack-mounting hardware
• 4 DC power feeds and for receivers
• DC outputs for antenna bias
• Supports QLX-D, ULX, ULX-D, SLX, and BLX4R receivers
• Does not include antenna patch cables or locking power cables.  Only intended for QLX-D and BLX4R systems, or when you have existing BNC patch cables.
• WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.
• The warning above is legally required, and does not indicate any product safety violations.  This warning is to inform the consumer of their right-to-know, read more on our overview page.