Fleenor 124 DMX/RDM Isolated Splitter
$435.90
each
Doug Fleenor Designs
Special Order
We don't normally stock this item, but can typically get it to you within 1 - 2 weeks.
Only %1 left
SKU
DFD-124
Model
124
The 124 is a four output DMX splitter that also supports the RDM protocol. Each output features its own driver circuit, insuring a problem on one output will not affect the other outputs. The four outputs share a common (pin 1 tied together). The input is completely isolated from the outputs (there are no electrical connections between any of the input pins and any of the output pins).
The rugged 1/10" aluminum chassis is designed for portable use. A 1/2" hole is provided for truss or pipe mounting using a C-clamp or half coupler. Additional slots are provided for safety cables.
- 4 outputs
- Processing Delay of 2μS (0.000002 seconds) speeds up RDM communication
- Signal input is optically isolated to 1,500 Volts
- Outputs are not electrically isolated from each other
- 5 year warranty for peace of mind
| Includes | Attached Edison Power Supply |
|---|
| Basics | |
|---|---|
| Includes | Attached Edison Power Supply |
| Manufacturer | Doug Fleenor Designs |
| Model # | 124 |
| Our SKU | DFD-124 |
| Dimensions | |
|---|---|
| Box L x W x H | 7" x 8" x 4" |
| Weight | 2 |
Check items to include, then click "Add to Cart" above.
-
DMX CableFrom $37.60 each -
Economy DMX TerminatorFrom $21.20 each -
Cable Hook$18.70 each
Write Your Own Review
We found other products you might like!
-
Fleenor DMX Isolated SplitterFrom $602.10 each -
Fleenor Enhanced² DMX Isolated Splitter$1,112.30 each -
DMX/RDM Repeater Pro$1,618.80 each -
Netron 6-port DMX/RDM SplitterFrom $448.00 each -
Netron 10-port DMX/RDM Hybrid Splitter$796.00 each -
eDIN #1009 DMX/RDM Splitter$568.80 each