S250 Strut Bracket
From
$41.00
each
On Order
Normally in stock, more are on the way and should arrive within 2 - 3 weeks.
Only %1 left
SKU
MSC-STRUT-S250
This Strut bracket consists of a piece of A1200 series Unistrut welded onto a metal plate with two holes for mounting to your structure.
- Hole Diameter: 9/16"
- Plate Thickness: 3/16"
- Measures: 2" x 4-5/8"
- While we refer to this hardware using the generic term "Strut", it is also known as Unistrut or SuperStrut. We use A1200 Series Half Slot Channel for the majority of our installations, but most of the hardware we carry should work with any strut channel with a width of 1-5/8" and an opening of 7/8".
- WARNINGRigging requires a thorough knowledge of loading dynamics & design factors. Improper installation or misapplication of a single product can lead to structural failure, bodily injury, or even death.
When planning a rigging project, we strongly recommend that purchasers use an experienced ETCP rigging technician, and/or personnel meeting the OSHA "competent person" standard.
| Basics | |
|---|---|
| Our SKU | MSC-STRUT-S250 |
| Dimensions | |
|---|---|
| Weight | 2 |
Check items to include, then click "Add to Cart" above.
-
Uni-Bolt for Strut Channels$27.70 each -
Track Tamer for StrutFrom $36.90 each -
AB100 Strut Nut$1.70 each -
AB202 90° Angle Fitting$5.50 each -
X207 Flat Plate Fitting$7.50 each -
A210 U-Support Fitting$13.00 each -
U501 Strut Beam Clamp$9.00 each -
512-U Strut Beam Clamp$9.50 each -
AB214 90° Shelf Bracket$25.00 each -
AB241 Flat Plate Strut WasherFrom $2.00 each -
AB206 Flat Plate Fitting$4.50 each -
AB205 90° Angle Fitting$5.25 each -
AB204 90° Angle Fitting$5.00 each
Write Your Own Review
We found other products you might like!
