eDIN #1008 LED Dimmer/DC Driver

The eDIN #1008 provides direct pulse-width modulation (PWM) control of common anode, constant voltage LED fixtures — typically string lighting.  Multiple modes, including 16-bit, ensure a smooth dimming curve.  The module also provides efficient switching control of DC devices such as solid state relays and solenoids.

• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Controls constant voltage LED fixtures rated between 5 to 30 VDC
• Six PWM outputs, individually fused at 4A

  • 6A fuse model available for use with 12V LED fixtures
• Two spare fuses included
• DMX512-present relay (normally open or normally closed)
• Contact closure panic input drives all outputs to full
• Auxiliary 0-10V analog inputs HTP-merged with DMX input
• User-adjustable smoothing algorithm
• User-adjustable minimum and maximum output levels
• Multiple loss-of-signal options
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• Data and power easily daisy-chained between modules
• Termination switch
• 8" long
• 5W power consumption
• Does not include power supply, requires 9-30 VDC PSU.  The "DMX Installation Repeater" listed below adds a power supply and enclosure to this #1002 Splitter.