Rosco Image Spot LED Projector

Using a mere 45 watts of power, the Image Spot LED projector packs an amazing amount of light output from a versatile and compact design.  The cool white LEDs and crystal clear optics ensure bright imaging in virtually any environment, and enable vivid gobo projection up to 40' away!  Image Spot can also be used to create spot illumination for artwork in museums, accent lighting in hospitality venues or highlight products inside retail displays.

Image Spot is available in both IP40 and IP65 models, allowing it to be used indoors or outdoors.  Choose from the available narrow, medium, or wide lens when ordering to achieve the imaging or beam spread your project requires.

• 3000K Warm White (Tungsten) -or- 5500K Cool White (Daylight) LED Array
• L70 lifetime of 50,000 hours
• Fixed beam optics
• Accepts Rosco Image Spot gobos and Permacolor Dichroic Glass Color Filters
• On board dimming control
• DMX512 compatibility provides flicker-free 100%-0% dimming
• Passive cooling means operation is completely silent
• IP65 Options for outdoor use, both with and without DMX
• RJ45* DMX In (except on IP65 version without DMX)
• Requires USB Programming Cable to set DMX Address.
• *RJ45 connectors are for DMX512 control only, this fixture will not work on lighting networks (sACN/Net3/etc.).  They simply allow you to use cheaper Cat5e cable instead of 5-pin DMX.