The ETC Selador Desire D40XTI LED luminaire gives you the most flexible color mixing for your building. Featuring the x7 Color System - which combines up to seven colors at the source for the broadest color range available from an LED - the D40XTI is a rugged, durable fixture ETL 1598-rated for permanent indoor use and IP66-rated for long-term outdoor use. The D40XTI features Selador Desire-quality dimming capabilities, transitioning its intensity like a conventional fixture, without noticeable steps.
Best all-around theatrical-quality light. The x7 Color System is optimized to create clean white and tinted light, to bring out the beauty of set pieces, and render individual skin tones naturally. All while still providing full range color mixing.
Broadest color range for spectrally-balanced saturated and tinted light. Able to match the color from your gelled tungsten sources, Vivid luminaires fit the bill when you need high-brightness light with bold impact and rich, saturated colors.
Combines an equal number of warm white and cool white LEDs for variable color temperature mixing. Adds five additional x7 LED colors to fill the white LED spectral gaps. Provides the richest variable white light possible in an LED luminaire.
Fixed "Warm White" 3000K LED array for max brightness when matching tungsten fixtures.
Fixed "Cool White" 5600K LED array for max brightness in broadcast and studio applications.
Waterproof 72" bare end power lead, for outdoor use
Noiseless convection cooling, no fans
Rugged die-cast all-metal housing
ETL Listed to UL1598; IP66 rated for exterior wet location use
For permanent installation only, must be installed by a qualified electrician in accordance with all national and local electrical/construction codes and regulations. DMX Termination Board requires junction box (not included)
No LCD screen or buttons. Must be configured via RDM.
Do not plug into dimmers, use constant power or relays.
¹ Red-shift only available on Lustr+, Vivid, and Studio HD fixtures
² High Color Rendering (above 85 CRI) does not apply to the Studio Daylight fixture
Hanging Yoke, 6' Bare End Waterproof Power Cable, 6' Bare End Waterproof DMX Data Cable, DMX Termination Board, Secondary Lens Spacer Kit
417 page extensive lab report covering the entire ETC LED fixture line. Testing performed by a 3rd party, intended for use in securing rebates from local energy groups (i.e. power company, city/local).