Source Four Shutter Barrel Kit

This Shutter Barrel kit connects your ETC LED Light Engine or HPL-based Tungsten Reflector Housing with traditional Standard/EDLT Source Four Lens Tubes.  Both LED/HPL versions feature the same parts, the only difference is which Source Four sticker is affixed to the shutter barrel.

• Easily install with a phillips screwdriver in less than a minute
• Primarily for using existing Standard/EDLT lens tubes with the Source Four LED Series 3 (see note below!)
• Designed for use with the following:

  • Source Four LED Series 3 ("LED Engine Only" option, plus this Shutter Barrel Kit and this longer screw)
  • Source Four LED Series 2 and Series 1 ("LED Engine + Shutter" option)
  • All versions of Source 4WRD ("LED Engine + Shutter" option)
  • ColorSource Spot and Spot V ("LED Engine + Shutter" option)
  • Source Four ERS (Tungsten/HID)
• Not compatible with ColorSource Spot jr
• When used with Source Four LED Series 3, an additional part is required to prevent separation of the shutter barrel when rotated.  Part number HW5832 is a longer screw which should be used to prevent separation.
• S4 LED and HPL versions are identical parts, but feature different stickers