Source 4WRD Color LED

• Feb. 2^nd — ETC has discontinued the original S4WRD Color and replaced it with S4WRD Color II.  For the same price you get a 36% increase in warm whites and dramatically improved color rendering!

The Source 4WRD Color LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes.  It means more stage looks with fewer fixtures using less energy and needing less maintenance, all at a compelling price point.  With the Source 4WRD Color engine you get millions of looks with the same fixtures you've relied on for years.

It takes less than five minutes to upcycle your Source Four to 4WRD Color.  The Source 4WRD Color provides a simple, cost-effective, non-destructive retrofit of existing Source Four profile fixtures.  You can quickly convert an incandescent Source Four ellipsoidal fixture to an RGBA color-changing luminaire while retaining all the best features of the Source Four.

• Full Color LED replacement for full size Source 4 fixtures, also works with Source 4WRD PAR(nel) fixture bodies
• Unique LED design mimics a standard HPL lamp
• Comparable to 575w long-life fixture when using saturated colors
• RGB-A LED Array (Red, Green, Blue and Amber)
• Tunable from 2200K - 6500K
• 83 CRI (at 3200K)
• Control via DMX -or- with local presets
• Has Z knob to adjust peak/flat beam characteristics
• Internal heat pipe technology, works from 5°C - 50°C
• Hardwired 3' power input, no power-thru connection
• RJ45* DMX/RDM in/thru connections
• L70 lifetime TBD
• 3-year warranty
• Gobo projection is possible, but not recommended because the reflector diffusion prevents a sharp focus (halo effect around edges).
• Not compatible with Source 4 Jr, Source 4 Fresnel, or tungsten Source 4 PAR(nel).
• *RJ45 connectors are for DMX512 control only, this fixture will not work on lighting networks (sACN/Net3/etc.).  They simply allow you to use cheaper Cat5e cable instead of 5-pin DMX.