Source Four LED Series 2

• June 16^th — Lead time on shipping S4LED Series 2 is estimated at 12 weeks *  once the factory is given an order (which will also secure your place in line).
  
  This longer than normal lead time is a result of the global chip shortage, and affects all manufacturers.  ETC is working tirelessly to clear backlogs and source components, however this is likely to continue into 2023.  While we all hope its resolved sooner, we encourage customers to plan for extended lead times.
• * Due to the rapidly changing situation, lead time can change within hours of an update.  Sometimes it can be extended due to supply chain issues like delayed/missing packages of critical parts.

• Tungsten HD and Daylight HD arrays were discontinued on September 30^th 2021.  For white-light applications see the ColorSource Spot Pearl, or Series 3 Daylight HDR.
• Per ETC, there are no plans to discontinue the Lustr array option.

ETC's x7 Color System combines a balanced recipe of up to seven colors to create evocative color mixes.  The Source Four LED Series 2 Lustr array takes the idea even further, with the addition of a lime-green LED emitter.  Lime green increases the luminaire's lumen output in open white and lighter tints to make them brighter and livelier, better matching the color of a conventional Source Four fixture.  The lime also enriches color-rendering by better marrying the red and blue ends of the color spectrum, for truer-to-life light that fills in the gaps that ordinary LEDs leave behind.

ETC also added more red to the x7 Color System in the Source Four LED Series 2 Lustr array.  Working in unison with the lime-green emitter, the extra red means the luminaire can produce ambers, straws and pinks up to three hundred percent as bright as those from the original Source Four LED.  The deeper, richer color from the Source Four LED Series 2 Lustr array will evoke the strongest audience reaction to your sunset, moonlight and dramatic scenes.

• LED Engine Only or with Shutter Barrel?

  • LED Only Just the LED Engine and yoke.  For retrofitting existing full-size Source Four fixtures, or when using alternate lens options (Cyc/Fresnel Adapters, Zoom Lenses, or the next-generation XDLT Shutter & Lens Tubes).
  • LED Shutter LED Engine with a Standard Source Four Shutter Barrel.  Just add a Source Four Lens Tube (EDLT recommended).
• 60 Luxeon Rebel LED emitters
• High Color Rendering
• Includes slots for glass or stainless steel patterns and soft focus diffuser
• Accessory slot for motorized pattern devices or optional iris
• Multiple control options, including RGB, strobe, and console-free Master/Slave mode
• 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
• Optically calibrated and LED droop compensation
• Works with all Source Four LED Lens Tubes, CYC Adapter, Fresnel Adapter, and next-gen XDLT Lens Tubes
• 5-pin DMX In and Out
• PowerCon In and Out
• ETL Listed to UL1573; IP20 rated
• Do not plug into dimmers, use constant power or relays.