COVID-19 Info — Our showroom and facility remain open as we observe county and state guidelines. Non-contact pickup remains available to customers as an option. For the latest pandemic-related updates and policies see this page.
August 30th — In-stock paint can ship immediately, however backorders may be delayed for weeks to months. We can't say definitively which colors (if any) will be affected until the factory is given an order (which will also secure your place in line, and can be modified after placing).
We are receiving regular paint shipments from Rosco, however they're dealing with an industrywide shortage of raw materials that is impacting even the largest paint manufacturers. Unfortunately this is expected to continue well into 2022, so we recommend planning for extended lead times (and have backup plans) as we do our best to keep our shelves stocked.
VividFX, an ultra-violet special effects paint represents a spectacular development for the special effects designer, scenic artists, and night club designer. This range of brilliant ultra-violet paints is available in thirteen vibrant colors. One of the widest palettes available! VividFX paints have been formulated using the highest quality fluorescent pigments available giving the artist an unparalleled combination of color choice, UV "glow" and versatility.
CoverageApproximately 300 feet² per gallon, depending on substrate, application tool and film thickness
Binder TypeVinyl Acrylic
DilutionVividFX should be used straight out of the can. It can be diluted with water if necessary, however, this may reduce the hiding power of the paint as well as the "glow" under UV lights.
Surface PreparationSurfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.
ApplicationStir contents well before use. Apply by brush, roller or spray gun. Apply in thin uniform coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge.
Film Thickness2 mil. Dry Film
Average Dry TimeAt 75°F, dries to the touch in 30-45 minutes. Can be re-coated in 1-2 hours.
Clean-upSoap and water
Shelf LifeMinimum shelf life for unopened, sealed paint is approximately 24 months when stored in a temperature controlled location
NOTESFluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible.
CAUTIONSDo not apply when surface or air temperatures are below 50°F (10°C). Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco/Musson assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.