VRX-AF-II Array Frame

The VRX-AF is an array frame kit designed to be used for suspension of the VRX932LAP line array loudspeaker.  The optional array frame kit includes an array frame, four quick release pins, a pair of forged 3/8" shackles, and a pair of drop levers.

The following table defines the maximum number of speakers that may be suspended using the VRX-AF frame.  A minimum design factor of 7:1 is maintained for all speaker configurations at or below those indicated in the table.

For some applications, it may be necessary to pull back the array from the bottom in order to achieve the desired coverage.  Every VRX-AF is supplied with a spare set of quick release pins and a pair of spare drop levers that are used to adapt a second array frame to the bottom of a VRX932LAP array.  Once these are installed on the bottom enclosure, the array frame may be attached as previously described.

Ground-stacked, upward aimed array: Applications such as covering stadium bleachers from the playing field may be addressed by installing the VRX-AF array frame to the bottom of the array as described above.  Up to four VRX932LAP loudspeakers may be locked together and ground stacked using the VRX-AF array frame kit, as shown

• WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.
• The warning above is legally required, and does not indicate any product safety violations.  This warning is to inform the consumer of their right-to-know, read more on our overview page.