The VRX-SMAF is an array frame kit designed to be used for suspension of the VRX928LA line array loudspeaker. This array frame kit includes an array frame, two quick release pins, a pair of forged 3/8" shackles, and a pair of drop levers.

The following table defines the maximum number of speakers that may be suspended using the VRX-SMAF frame. A minimum design factor of 7:1 is maintained for all speaker configurations at or below those indicated in the table.

Maximum number of VRX928LA in array	6	5	4	3	2	0
Maximum number of VRX915S in array	0	2	2	2	3	4

For some applications, it may be necessary to pull back the array from the bottom in order to achieve the desired coverage. Every VRX-SMAF is supplied with a spare set of quick release pins and a pair of spare drop levers that are used to adapt a second array frame to the bottom of a VRX928LA array. Once these are installed on the bottom enclosure, the array frame may be attached as previously described.

Ground-Stacked, Upward Firing Arrays: Applications may be addressed by installing the VRX-SMAF array frame to the bottom of the array as described above. Up to four VRX928LA loudspeakers may be locked together and ground stacked using the VRX-SMAF array frame kit.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The warning above is legally required, and does not indicate any product safety violations. This warning is to inform the consumer of their right-to-know, read more on our overview page.