Egg Crate Louvers serve a similar function to a Top Hat, but do so in only 1/2" of depth. A 45° cut-off is obtained by using cells that are 1/2" x 1/2", by 1/2" deep. Egg Crate Louvers drop into Accessory Holders, and give a sleek appearance to the lighting fixture while providing good beam control. Fabricated from light gauge steel with hemmed edges and a black powder coat finish. Designed for the fixtures below, and should work on other fixtures* which use the same media frame size.

7.5" media frame size
~45° cutoff angle
Works great with:
- Altman 6" Fresnel
- Altman PAR 56
- ETC ColorSource Fresnel
- ETC Desire Fresnel
- ETC fos/4 Fresnel
- ETC Source Four PAR(nel)
- ETC Source Four Fresnel
- ETC Source Four LED Fresnel Adapter
Works with, but may exhibit color shifts:
- ETC ColorSource PAR *
- ETC Selador Desire D40 * / D40XT * (except XTI)
- ETC Source 4WRD PAR(nel) *
* Color may shift on LED Fixtures without a homogenized beam. This is due to the many source of light, especially on fixtures without in-lens color mixing.
Not for use with ellipsoidal/profile (hard edged) fixtures, will distort the beam