ETCnomad Dongle

• Jan. 26^th — Lead time on shipping Gadget II (including ETCnomad Education Edition with Gadget II) is estimated at 11 weeks *.
  
  The primary cause of this longer than normal lead time is a critical "brain" chip which interfaces the circuit board to other devices.  When ETC noticed supply issues earlier this year, they tested similar chips as a drop-in replacement (no success), and started a redesign process on moving to an entirely new chip.  Despite shipping products at near-2019 levels, supply of the old "brain" chip continues to outstrip demand, which in turn has increased lead times.
• * Due to the rapidly changing situation, lead time can change within hours of an update.  Sometimes it can be extended due to supply chain issues like delayed/missing packages of critical parts.
• Gadget redesign is complete!  However, in the interest of shipping ASAP, new Gadgets will temporarily lack some features:

  • RDM from local DMX ports
  • Device firmware updates via Concert from local DMX ports

  ETC has committed to releasing additional firmware to restore these features to all new Gadgets in early 2023.

Hopping from gig to gig and can't bring your console with you?  Doing the lighting in a venue whose desk has seen better days?  That's where ETCnomad control comes in.  Small enough to fit on your keychain, ETCnomad plugs into your computer and opens up the power of Eos & Hog 4 PC software, so you can program and run shows anywhere.

ETCnomad can serve as a primary controller, a backup, or a client device - or work offline entirely - operating on either a PC platform running Microsoft Windows 7 or higher, or natively on macOS Mojave or later.  Available in either a base or unlocked version, the base unit supports 1024 outputs¹ while the unlocked version supports 6144.

ETCnomad Features

• 2 or 12 DMX universes¹
• Computer-based lighting control software, USB key allows output from Eos or Hog 4 PC software on your computer
• Output DMX via Ethernet (sACN/Net3/ArtNet), or optional Gadget USB to DMX Interface
• Works with Programming Wings, Fader Wings (Universal Wings are PC only), and OSC Controllers²
• Supports iRFR, aRFR, Net3 Show Control and I/O Gateways
• Up to three fader wings may be used
• See datasheet for minimum hardware requirements.  Eos generally works with Windows 7 or higher, and macOS Mojave or later.  Hog 4 PC supports Windows 10 only.
• ¹ Starting in Eos v2.9 and Hog 4 PC v3.12.  Earlier versions of Eos only unlock 1 universe at base level. Earlier versions of Hog 4 PC not compatible.
• ² Hog 4 PC only supports OSC/MIDI controllers when using fully unlocked (6K/12-universe) ETCnomad Dongle, or with Hog Wings.

Eos Family Features

• Approachable yet powerful syntax for programmers of every level
• Award-winning color controls, including six Color Pickers and a Gel Picker for color mixing.
• Custom-design your control interface using Magic Sheets, with topographical or abstract layouts.  Full interaction with the command line allows command instructions - from the simplest and most immediate to the most complex - accessed from a mouse or single- or multi-touch displays.
• Augment3d 3D programming and visualization environment²
• Virtual Media Server function for pixel-mapping
• Timecode and automation integration
• Show file compatibility with the entire Eos Family, from the Apex 20 down to the Element 2³ and ETCnomad.
• Three user-definable workspaces per monitor, each with discrete split-screen controls, frame management, and snapshots.
• Client/server networking and synchronized backup
• Client and Offline programming on PC⁴ and Mac⁴ via ETCnomad
• 99 discrete online users with partitioned control
• 32,768 Control Channels (Fixtures)⁵
• 10,000 Cues and 999 Cue Lists
• 200 Active Playbacks and 999 Submasters
• 100 10-Fader Pages for Playbacks and Submasters
• 1,000 each of Presets, Palettes, Groups, Effects, Snapshots, Curves, and Color Paths
• 99,999 Macros
• ² Augment3d available starting in Eos v3.0, which does not support early generation Windows XPe devices.
• ³ The Element 2 does not support Multiple Cue Lists or more than one active playback.  Additionally, fader wings are not supported.
• ⁴ PC requires Windows 7 or higher. Mac requires macOS Mojave or later.  The ETCnomad software is free for offline programming or "mirror mode", but requires a USB Key to act as a client.
• ⁵ The software is still limited by the number of DMX universes/outputs, thus you may not be able to use all these channels.

Hog 4 PC Family Features

• Short-command style and direct access tools.  Designed for professionals and advanced users
• Show file compatibility with the entire Hog 4 Family, from the Hog 4 down to the HedgeHog 4
• Configure and program a pixel-map layout
• Channel layouts for topographical views of channels and other show data
• Client and Offline programming on PC⁶ via ETCnomad
• Wired and wireless networking ability with multiple Wholehog console systems
• Unlimited number of Art-Net and sACN universes via Ethernet DMX Processors
• Unlimited number of simultaneous crossfades
• ⁶ PC requires Windows 10.  The Hog 4 PC software is free for offline programming, but requires a USB key to act as a client.