Sensor3 Installation Rack

From $7,490.00 each
SKU
SR3
Model
SR3
- +

Sensor3 bridges your system to the future.  The ideal new theater design or retro fit uses a hybrid lighting system that can accommodate all loads - tungsten, LEDs, arc-source movers, and the unknown, while being ready for a time when LEDs may be the dominant source.  The new Sensor3 ThruPower Module allows you to switch freely between constant power, on/off switching with air-gap relays, and dimming for your lighting loads.

The Sensor3 Power Control System's tight integration with ETC consoles makes it an extension of them.  Not only do you have instant access to system and circuit status, you can shift between dimmable and non-dim operation, update curves, change minimum or maximum output voltages, set preheats, activate backup looks, and record loads.  And ETC's Net3 means that any ACN-based software or console can be seamlessly integrated into the Sensor3 system.

  • Up to 24 channels of dimming across 6 or 12 D20 dimmer modules
    • Need more channels, want Advanced Features (AF), or don't want all D20 modules?  Send us an email for a custom quote.
  • Smoothing for ultra-fine dimming of LED fixtures
  • Monitoring and adjustment of incoming line voltage with min and max scale voltages
  • CEM3 Power Control with Standard diagnostic reporting (no advanced features)
  • Direct Ethernet control signal input (Net3, sACN)
  • Two DMX512-A inputs
  • High-efficiency cooling system with airflow sensor
  • High-visibility LED status beacon
  • All racks UL and cUL Listed
  • Does not include Engineering Services, Termination, or System Energization.  Not an Advanced Features (AF) Sensor3 Rack.
IncludesSensor3 Rack, CEM3 Processor, D20 Modules
Dimmer
ApplicationArchitectural - Installation
Basics
IncludesSensor3 Rack, CEM3 Processor, D20 Modules
ManufacturerETC
Model #SR3
Our SKUSR3
Dimensions
Weight45
  • 493.46
  • J, 01-2018
  • Apr. 6th, 2018
  • 436.32
  • K, 02-2018
  • Apr. 6th, 2018
  • 128.28
  • A, 03-2012
  • Apr. 6th, 2018
RideThru provides at least 6 seconds of back-up power for a single CEM3 module.
  • 427.17
  • A, 03-2012
  • Apr. 6th, 2018
BatteryPack provides at least 30 minutes of back-up power for a single CEM3 module.
  • 535.70
  • A, 02-2012
  • Apr. 6th, 2018
  • 8.64
  • C, 01-2013
  • Apr. 6th, 2018
  • 63.84
  • 12-2011
  • Apr. 6th, 2018
Front view of product, for use in your drawings.
Front view of product, for use in your drawings.
3D view of product, for use in your drawings.
Front view of product, for use in your drawings.
Front view of product, for use in your drawings.
3D view of product, for use in your drawings.
Front view of product with EBDK to left, for use in your drawings.
Front view of product with EBDK to right, for use in your drawings.
Front view of product with EBDK to left, for use in your drawings.
Front view of product with EBDK to right, for use in your drawings.
Standard drawing of product, for use with project submittals.
Standard drawing of product, for use with project submittals.
Standard drawing of product, for use with project submittals.
Standard drawing of product, for use with project submittals.
Standard electrical drawing of product, for use with project submittals.
Standard electrical drawing of product, for use with project submittals.
Standard electrical drawing of product, for use with project submittals.
Standard electrical drawing of product, for use with project submittals.
  • 5.84
  • 07-2012
  • Apr. 6th, 2018
Write Your Own Review
You're reviewing:Sensor3 Installation Rack
Your Rating
We found other products you might like!
Copyright © 1971-2019 Musson Theatrical, Inc.